Individual tubes are utilized to give a wide variety of heating and cooling duties. The tubes are manufactured to our own specification and are profiled to give turbulence at the low flow rates to enable scale up to production.
·Minimum sample required.
·Flow rates from 10 to 40 Ltr per hour(Higher available by request).
·Highly accurate electromagnetic flowmeter as option.
·Product system pressures to 10 bar.
·Heating to 152 deg C at the flow rates stated.
·Cooling to below 5 deg C at the flow rates stated.
·Holding tubes of any time available and can be placed wherever needed.
·Built in refrigerator or your chilled water supply.
·Built in true CIP(Clean In Place),flow for CIP more than 500 Ltr per hour.
·Each heating section is individually controlled to enable a wide setting of product temperatures.
·2 Electrically heated hot water recirculators.
·Optional touch panel control fascia with flow path of system.
·No steam required.
·SIP(Sterilise In Place) an option for Aseptic sampling.
·Aseptic sampling when used with the optional Clean Bench.
·In line homogeniser can be added either upstream or downstream.
·Level sensor in hopper for easy wash out after product and CIP.
·Computer interface with real time temperature recording.
·Static mixers optional for difficult products.